ATCOM AT800 Series Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Nie ATCOM AT800 Series. XTS/XTL Series - General Dynamics SATCOM Technologies Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 0
R8000 Series
Communications Systems Analyzer
AUTOTUNE USER GUIDE
Motorola ASTRO® XTL™ Series
Motorola ASTRO® XTS™ Series
General Dynamics SATCOM Technologies
3750 W. Loop 281
Longview, Texas 75604
Copyright 2014 General Dynamics
All Rights Reserved
Printed in U.S.A.
CG-1148 Rev. B
Przeglądanie stron 0
1 2 3 4 5 6 ... 45 46

Podsumowanie treści

Strona 1 - AUTOTUNE USER GUIDE

R8000 Series Communications Systems Analyzer AUTOTUNE USER GUIDE Motorola ASTRO® XTL™ Series Motorola ASTRO® XTS™ Series General Dy

Strona 2

AutoTune™ User Guide 3 Figure 3-2. ASTRO® XTL™ Series High Power Test Setup Diagram

Strona 3

AutoTune™ User Guide 4 4. Motorola ASTRO® XTL™ Series Alignment and Test Descriptions Note: Throughout this section are references to Test Frequency

Strona 4 - TABLE OF CONTENTS

AutoTune™ User Guide 5 Name Description Result Pass or Fail. Frequency Error within Max Limit, Min Limit Frequency Test Frequency Freq Error Measure

Strona 5

AutoTune™ User Guide 6 4.2. TX Power Out RF Control Port Frequency Modulation Attenuation Monitor RF IN/OUT Test Frequency FM 40 dB Table 4-4. Ana

Strona 6 - LIST OF TABLES

AutoTune™ User Guide 7 4.2.2. Test The radio is placed into Test Mode and commanded to transmit. Beginning at the lowest TX Test Frequency, the out

Strona 7

AutoTune™ User Guide 8 4.3. Deviation Balance RF Control Port Frequency Modulation Attenuation Monitor RF IN/OUT Test Frequency FM 20 dB Table 4-8

Strona 8 - 2. Scope

AutoTune™ User Guide 9 4.4. Deviation Limit RF Control Port Frequency Modulation Level Monitor RF IN/OUT Test Frequency FM 20 dB Table 4-11. Analy

Strona 9

AutoTune™ User Guide 10 4.5. Distortion Note: This test is not supported for Motorola ASTRO® XTL™ Series High Power models. This is a test only; t

Strona 10

AutoTune™ User Guide 11 4.6. Sensitivity (SINAD) Note: This test is not supported for Motorola ASTRO® XTL™ Series High Power models. This is a tes

Strona 11 - Descriptions

AutoTune™ User Guide 12 4.7. Noise Squelch Threshold Note: This test is not supported for Motorola ASTRO® XTL™ Series High Power models. This is a

Strona 12

AutoTune™ User Guide i AUTOTUNE™ SOFTWARE LICENSE AGREEMENT The software license agreement governing use of the R8000 Series Communications Systems

Strona 13 - 4.2. TX Power Out

AutoTune™ User Guide 13 4.8. Digital Sensitivity (BER) NOTE: This test requires an analyzer with P25 Conventional test mode capability. The purpose

Strona 14

AutoTune™ User Guide 14 4.9. Ext Mic Voice Modulation Note: This test is not supported for Motorola ASTRO® XTL™ Series High Power models. The purp

Strona 15 - 4.3. Deviation Balance

AutoTune™ User Guide 15 Figure 4-1. Place keyed microphone next to analyzer speaker. Figure 4-2. Adjust analyzer volume until about 4 kHz deviati

Strona 16 - 4.4. Deviation Limit

AutoTune™ User Guide 16 5. Motorola ASTRO® XTS™ Series Radio Test Setup In order to perform the test and alignment procedures, the ASTRO® XTL™ Serie

Strona 17 - 4.5. Distortion

AutoTune™ User Guide 17 6. Motorola ASTRO® XTS™ Series Alignment and Test Descriptions Note: Throughout this section are references to Test Frequenc

Strona 18 - 4.6. Sensitivity (SINAD)

AutoTune™ User Guide 18 Name Description Result Pass or Fail. Frequency Error within Max Limit, Min Limit Frequency Test Frequency Freq Error Measur

Strona 19

AutoTune™ User Guide 19 6.2. TX Power Out RF Control Port Frequency Modulation Attenuation Monitor RF IN/OUT Test Frequency FM 30 dB Table 6-4. An

Strona 20

AutoTune™ User Guide 20 6.3. Deviation Balance RF Control Port Frequency Modulation Attenuation Monitor RF IN/OUT Test Frequency FM 30 dB Table 6-

Strona 21

AutoTune™ User Guide 21 6.4. Deviation Limit RF Control Port Frequency Modulation Level Monitor RF IN/OUT Test Frequency FM 30 dB Table 6-10. Anal

Strona 22

AutoTune™ User Guide 22 6.5. Distortion This is a test only; there is no alignment. RF Control Port Frequency Modulation Level Generate RF IN/OUT

Strona 23

AutoTune™ User Guide ii - Neither the name of the SciWare, James Kring, Inc., nor the names of its contributors may be used to endorse or promote

Strona 24

AutoTune™ User Guide 23 6.6. Sensitivity (SINAD) This is a test only; there is no alignment. RF Control Port Frequency Modulation Level Generate R

Strona 25

AutoTune™ User Guide 24 6.7. Noise Squelch Threshold This is a test only; there is no alignment. RF Control Port Frequency Modulation Level Genera

Strona 26 - 6.2. TX Power Out

AutoTune™ User Guide 25 6.8. Digital Sensitivity (BER) NOTE: This test requires an analyzer with P25 Conventional test mode capability. The purpose

Strona 27 - 6.3. Deviation Balance

AutoTune™ User Guide 26 6.9. Internal Voice Modulation The purpose of this procedure is to test the ability of the radio’s internal microphone audi

Strona 28 - 6.4. Deviation Limit

AutoTune™ User Guide 27 Figure 6-2. Adjust analyzer volume until about 4 kHz deviation is measured.

Strona 29 - 6.5. Distortion

AutoTune™ User Guide 28 6.10. External Voice Modulation The purpose of this procedure is to test the ability of an external microphone attached to

Strona 30 - 6.6. Sensitivity (SINAD)

AutoTune™ User Guide 29 7. Basic Troubleshooting Symptom Possible Cause(s) Possible Solution(s) Radio repeatedly fails communication initialization

Strona 31

AutoTune™ User Guide 30 8. Support Information 8.1. Technical Support Telephone: 480.441.0664 Fax: 480.441.6915 Email: [email protected] 8.2. Sa

Strona 32

AutoTune™ User Guide 31 9. References Motorola, Inc. ASTRO® Digital XTL™ 5000 VHF/UHF Range 1/UHF Range 2/700-800 MHz Mobile Radio Basic Service Ma

Strona 33

AutoTune™ User Guide 32 Motorola, Inc. ASTRO® XTS™ 5000 VHF/UHF Range 1/UHF Range 2/700–800 MHz Digital Portable Radios Basic Service Manual, REV E.

Strona 34 - AutoTune™ User Guide

AutoTune™ User Guide iii TABLE OF CONTENTS 1. Introduction ...

Strona 35

AutoTune™ User Guide A-1 APPENDIX A. Test Limits The factory limits contain the default limits as defined by the radio manufacturer and generally

Strona 36 - 7. Basic Troubleshooting

AutoTune™ User Guide A-2 Section Test Name Limit Default Value 4.1 Reference Frequency Reference Frequency XTL 1500 VHF Min: -435 Hz Max: 435 Hz Ref

Strona 37 - 8. Support Information

AutoTune™ User Guide A-3 TX Power 700-800MHz Channel 6-10 Min=36.6 W Max=40.5 W TX Power 900MHz Min=31.5 W Max=34.7 W 4.3 Deviation Balance Deviatio

Strona 38 - 9. References

AutoTune™ User Guide A-4 Section Test Name Limit Default Value 6.1 Reference Frequency Reference Frequency XTS 5000 VHF Min: -348 Hz Max: 348 Hz Ref

Strona 39

AutoTune™ User Guide A-5 Sensitivity 900MHz Max=-116 dBm 6.7 Noise Squelch Threshold Noise Squelch -119 dBm 6.8 Digital Sensitivity (BER) BER VHF Ma

Strona 40

AutoTune™ User Guide B-1 APPENDIX B. Sample Test Result Report =================================================================================

Strona 41

AutoTune™ User Guide C-1 APPENDIX C. Revision History 1.18 Updates – Rev B L. Shirey 1/9/15 M. Mullins

Strona 42

AutoTune™ User Guide iv Figure 4-1. Place keyed microphone next to analyzer speaker. ... 15 Figure 4-2. Adjust analyzer volume

Strona 43

AutoTune™ User Guide v LIST OF TABLES Table 4-1. Analyzer Configuration for Reference Frequency ... 4 Table 4-2. Refere

Strona 44

AutoTune™ User Guide vi Table 6-22. Internal Voice Modulation test results ... 26 Table 6-23. Analyzer Co

Strona 45

AutoTune™ User Guide 1 1. Introduction The General Dynamics R8000 Series Communications Systems Analyzer AutoTune™ (hereafter “AutoTune”) is design

Strona 46

AutoTune™ User Guide 2 3. Motorola ASTRO® XTL™ Series Radio Test Setup In order to perform the test and alignment procedures, the ASTRO® XTL™ Series

Komentarze do niniejszej Instrukcji

Brak uwag